Rhino Gutter GuardThis product was posted on Wednesday, Dec 7th, 2011 | 0 comments
RHINO GOOD is a micro-expanded aluminum product yielding small diamond shaped holes that prevent most debris from entering the gutter system. The “non-flattened” nature of the surface creates a network of “speed bumps” to decelerate water velocity, thus augmenting water dissipation while inhibiting debris from “sticking” (minimum contact of the debris to the surface area). The unique “arch” shape of the product also affords forward “sloping” for rapid debris shedding and the “plateau” in the rear of the product ensures that water and/or debris cannot migrate backwards towards the fascia board.
The front leg of the product snaps in under the front lip of the gutter and guarantees that there will never be any water overflow and the back leg of the product rests on the hidden brackets for the gutters.Since this is not a micro-mesh product, some very small debris may enter the gutter, but it will keep leaves, twigs and most pine needles out. Smaller debris (shingle grit, etc.) may enter the gutter or lodge in the holes over time and it may be necessary to clean or remove some debris (inorganic & organic) from the system to maintain the proper performance.
As with all RHINO products, NO roof or shingle contact is required.
Our RHINO brand gutter protection systems were developed after years of research and experience in the gutter and gutter protection industry. That experience was used to create one of the most technologically designed gutter protection systems on the market today. From the size and shape of the holes openings to the degree of slope or arch on the products surface, the Rhino Gutter Guard systems are truly a product that is ahead of its time.
From our entry level gutter guard, all the way up to the industry standard RHINO BEST, you will encounter fewer failures, a larger amount of water dissipation (our test stands max out at 4.5” of rain per minute with no overflow) and a greater ease of self-shedding than any other comparable products on the market. Plus, with Rhino Best you get the added benefit of a product that can increase the longevity of your gutters and provide box-like strength
We have been manufacturing and designing roll forming machines for gutter protection systems since 2002. It’s a difficult process that has taken us years to perfected. Because of this explicit understanding of these processes, we are able to manufacture our products so efficiently that our overhead is substantially lower than our competition. The resulting savings are passed directly to our contractors, who in turn pass those savings on to the homeowner. You will not find a BETTER product for the money anywhere in the market.Disclaimer: Product content and images are owned by its rightful owner.
You can follow any responses to this entry through the RSS 2.0 You can skip to the end and leave a response. Pinging is currently not allowed.